Pairing GLUCUBE device with the APP process
To connect the GLUCUBE device to the app, you need to have Bluetooth and location permission enabled on your smartphone.
On the home screen of the app, go to the side menu and select "Connect your device".
Once we have accessed this screen, we must follow the following steps:
- Turn on the GLUCUBE device by following these instructions.
- With the device on, press "Search for device" and select the device that will appear on the screen (the GLUCUBE device must be on, with the connection LED flashing).
- GLUCUBE device will emit a double beep and a pop-up window will appear on your smartphone asking you to pair the device. Press pair and you will then be asked for a pairing code.
- Enter the PIN that appears at the end of the quick guide
If a link request message does not appear:
- Check your smartphone notifications
- Check pop-up notification permissions
- Restart the APP and retry the process
- Restart the smartphone and retry the process
If the connection between the app and the GLUCUBE device has been established correctly, the connection indicator on the device will remain fixed and the home screen will open to perform the measurement with the device.
On the device, you will see that the connection indicator remains on.
Fixed LED
Remember: Once the device is linked, it will automatically connect when you turn it on, as long as the APP is open.
The App interface has changed, both the videos and their content are pending update.
If you have any problems pairing GLUCUBE device to your smartphone, reset the device and repeat the pairing process: